Track Maintenance Tools NZG-31II Rail Drilling Machine

Technical specification Rail drilling machine

Pictures Rail drilling machine

Before using the rail drilling machine you should carefully read the instructions

• The operator have to read this operating manual carefully to know the machine structure and how to work safely with it. The operator must be familiar with the general safety measures!
• Always check every part of the machine before starting work, as well as the presence of grease in the engine and gearbox. If one of the mechanisms is broken or does not work correctly, do not start work until troubleshooting. The machine must only be used in good technical condition.
• While drilling, the force applied to the lever should be moderate and even, reduce the feed rate when you feel the hole is almost done. Make sure there is sufficient coolant when drilling.
• If the cutter is stuck, carefully remove it from the rail and then feed it slower.
• If the machine breaks down during operation, disconnect it from the rail and then repair it.
• The engine must be stopped during refueling. Keep it away from fire. Wipe up any spilled fuel after refueling.
• Never obstruct the exhaust pipe while starting and running the engine.
• Never clean chips while drilling
• Do not leave the engine running unattended for long periods of time.
• Be vigilant when pressing the accelerator, do not keep the engine at high revs for a long time, and this will increase its service life.

Sales and service maintenance

Hot Tags: track maintenance tools nzg-31ii rail drilling machine, China, manufacturers, suppliers, made in China, Internal Combustion Rail Drill, Fast Wooden Sleeper Drilling Tool, Rail Straightening Device, Sleeper Drill Pull Gasoline Machine, Drilling and Pulling Machine, Track Drilling Machine