Rail Tamping Series

YD-22 Rail Tamper Machine (also known as rail tamping machine/rail tamping/rail tamper/rail tamper machine/railroad ballast tamper/railway ballast tamping machine)is a new generation product...

ND-5 type railway tamping pick, commonly known as internal combustion portable tamping pick, is used for tamping the ballast under the sleeper during railway construction or railway maintenance.

ND-5 type railway tamping pick, commonly known as internal combustion portable tamping pick, is used for tamping the ballast under the sleeper during railway construction or railway maintenance.

Hpzx-1.1 internal combustion slope protection and shaping machine is suitable for slope protection and shaping treatment on both sides of the railway and pillow correction. The machine has the...

YD-22 Hydraulic tamping machine is a new generation product developed by our factory, which is based on the experience of domestic and foreign customers in the use of tamping machines and adopts...

DG550 electric rail tamper is suitable for tamping ballast and ballast bad in railway line overhaul and maintenance. The machine has the characteristics of environmental protection, low noise,...

YD-22 III intelligent rail tamping machine unit is a renewal product developed by our factory with new material and new technology.

YD-22 Hydraulic tamping machine is a new generation product developed by our factory, which is based on the experience of domestic and foreign customers in the use of tamping machines and adopts...

Technical Parameters 1, gasoline engine model: GX390 or GX160 × 2 2, power: 9.5KW or 4.0KW × 2 3, speed: 2842r / min 4, the number of vibration: 3000 times / min 5, amplitude: 1.2mm 6, the host...

ND-5 internal combustion tamping ho for railway bed maintenance of a small road maintenance machinery, mainly for railway track stone ballast and other granular materials tamping operations. It...

Technical Parameters Machine size (length x width x height) 450 × 340 × 790 mm Engine type single cylinder, air cooling, two stroke Displacement (m1) 80 No tool quality (kg) 23 Impact frequency (1...

Technical Parameters Electric tamping ho parameters 1, motor Power 350W Voltage 380V Number of revolutions 2880rpm 2, the excitation frequency of 48HZ 3, exciting force 3kN 4, pick plate form...