240mAh Portable Remote Control Jammer Dual Frequencies 433MHz/315MHz Signal Jamming Device for Sale

Since the establishment of our company, we have been committed to introducing global cutting-edge technology and equipment to provide customers with suitable Rail Cutting Machinery, Adjustable Hydraulic Rail Bolt Wrench, Railway Lifting Machine. We are well aware that quality and service are the foundation of a company's survival, thus we will continue to uphold customer first and pursue excellence. We attach great importance to team building, staff quality education and skill training with the guiding ideology of 'being a man in advance'.

 

Product Description

SNGM-180 portable internal combustion rail grinding machine for all types of rails for all-round grinding, its small size, flexible and lightweight, simple operation, high grinding efficiency, easy to carry, easy maintenance and repair, but also for other Occasions.

Usage Methord

1, the gasoline and two-stroke Komatsu gasoline engine special lubricants mixed with 50: 1 ratio or the use of the market to sell the two-stroke oil 25: 1 ratio of mixing, and shake evenly. Specific methods refer to the gasoline engine manual.

2, check whether the wheel damage and moisture deformation, the end surface is smooth, if the normal use of the wheel should be replaced immediately. Press the stop button above the spindle (stop button can only be used as a disassembly lock nut, prohibited as a stop brake), use the machine to carry the wrench, the grinding wheel lock nut off, replace the new wheel The Install the grinding wheel with the same way to tighten the lock nut. (Note: If the lock nut is not easy to remove through the stop button, you can use other wrenches on the back of the grinding wheel in the flat side, and then forced to disassemble.

3, start the gasoline engine, no-load operation of not less than 30 seconds, one hand to hold the front armrest, one hand after holding the handrail, internal combustion engine warmer, gradually increase the throttle, if no abnormal sound, the equipment is running smoothly and then polished.

After grinding

Grinding rail top

Grinding Crossing

Cutting fish bolt

Technical Parameters

1.Petrol engine
Model	Two-stroke gasoline engine
Power	1.42kW
Speed	≥7500r / min
2. Grinding wheel	∮ 180 × ∮22.2 × 6 Or ∮ 150 × ∮ 22 × 6
3. Wheel speed	≥ 70m / s
4, The spindle speed	≥ 6000r / min
5. Outer dimension	780 × 270 × 310
6. Machine weight	7k

Packaging

Production Flow

Certificate

Assessed Supplier

ISO9001

CRCC Cerfifite

 

Cooperation

Pakistan

Brazil

Poland

Thailand

Our product has exported to above 30 countries and regions in the last 3 years. Our good quality, reasonable price and perfect after-sales service have won the customers' attention. Warmly weclome you visit us and obtain the chance to cooperate.

FAQ

Q1:Who I am ?

 

A1:This is Miley Wang ,sale manager of the factory.

 

Q2:What is the Warranty about your product?

 

A2: 1 year for warranty .Consumable parts are available.

 

Q3:How is your quality?

 

A3: To guarantee top quality,best material are used.Besides, The engine is imported from abroad. You are highly welcome to visit our factory.

 

Q4:What we do?

 

A4:JINZHOU TIEGONG RAILWAY MAINTENANCE MACHINERY CO.,LTD is a professional factory producing small type railway maintenance machine. Such as Cutting machine ,Grinding machine, Tamping machine etc.

Q5: Why choose us?

 

A5:Top quality , competitive price ,plenty stock And Excellent Service.Our factory has more than 400 type products,24 years producing experience. Most of the pictures on Other suppliers’ website were stolen from our website.

 

Q6:How can I trust you?

A6: We have been Gold supplier from Alibaba for 8years,15years of overseas trading experience .Our reputation among customers and their satisfaction are the main reasons for our success.

 

Q7:What service you can provide?

 

A7: Installation video And user manual offered. For big quantity order , we can dispatch our engineer foroversea door-to-door service

 

Q8:What is the delivery condition and the payment?

 

A8: various methods of payment are acceptable.T/T is the commonly used way. Shipment will be arranged within 15days .We will inform you if short stock.

 

Q9:Your company is manufacturer or dealer?

 

A9: We are professional of railway maintenance equipment manufacturer. We have more than 400 types products,such as Rail Grinder, Rail Cutter, Rail Tamper, Rail Tenser, Rail Adjustor and so on.

 

 

 

 

Product Description

SNGM-180 portable internal combustion rail grinding machine for all types of rails for all-round grinding, its small size, flexible and lightweight, simple operation, high grinding efficiency, easy to carry, easy maintenance and repair, but also for other Occasions.

 Usage Methord

   1, the gasoline and two-stroke Komatsu gasoline engine special lubricants mixed with 50: 1 ratio or the use of the market to sell the two-stroke oil 25: 1 ratio of mixing, and shake evenly. Specific methods refer to the gasoline engine manual.

2, check whether the wheel damage and moisture deformation, the end surface is smooth, if the normal use of the wheel should be replaced immediately. Press the stop button above the spindle (stop button can only be used as a disassembly lock nut, prohibited as a stop brake), use the machine to carry the wrench, the grinding wheel lock nut off, replace the new wheel The Install the grinding wheel with the same way to tighten the lock nut. (Note: If the lock nut is not easy to remove through the stop button, you can use other wrenches on the back of the grinding wheel in the flat side, and then forced to disassemble.

3, start the gasoline engine, no-load operation of not less than 30 seconds, one hand to hold the front armrest, one hand after holding the handrail, internal combustion engine warmer, gradually increase the throttle, if no abnormal sound, the equipment is running smoothly and then polished.

After grinding 

 

Technical Parameters

1.Petrol engine
Model	Two-stroke gasoline engine
Power	1.42kW
Speed	≥7500r / min
2. Grinding wheel	∮ 180 × ∮22.2 × 6 Or ∮ 150 × ∮ 22 × 6
3. Wheel speed	≥ 70m / s
4, The spindle speed	≥ 6000r / min
5. Outer dimension	780 × 270 × 310
6. Machine weight	7k

Packaging

Production Flow

Certificate

Assessed Supplier

ISO9001

CRCC Cerfifite

 

Cooperation

Pakistan

Brazil

Poland

Thailand

Our product has exported to above 30 countries and regions in the last 3 years. Our good quality, reasonable price and perfect after-sales service have won the customers' attention. Warmly weclome you visit us and obtain the chance to cooperate.

FAQ

Q1:Who I am ?

 

A1:This is Miley Wang ,sale manager of the factory.

 

Q2:What is the Warranty about your product?

 

A2: 1 year for warranty .Consumable parts are available.

 

Q3:How is your quality?

 

A3: To guarantee top quality,best material are used.Besides, The engine is imported from abroad. You are highly welcome to visit our factory.

 

Q4:What we do?

 

A4:JINZHOU TIEGONG RAILWAY MAINTENANCE MACHINERY CO.,LTD is a professional factory producing small type railway maintenance machine. Such as Cutting machine ,Grinding machine, Tamping machine etc.

Q5: Why choose us?

 

A5:Top quality , competitive price ,plenty stock And Excellent Service.Our factory has more than 400 type products,24 years producing experience. Most of the pictures on Other suppliers’ website were stolen from our website.

 

Q6:How can I trust you?

A6: We have been Gold supplier from Alibaba for 8years,15years of overseas trading experience .Our reputation among customers and their satisfaction are the main reasons for our success.

 

Q7:What service you can provide?

 

A7: Installation video And user manual offered. For big quantity order , we can dispatch our engineer foroversea door-to-door service

 

Q8:What is the delivery condition and the payment?

 

A8: various methods of payment are acceptable.T/T is the commonly used way. Shipment will be arranged within 15days .We will inform you if short stock.

 

Q9:Your company is manufacturer or dealer?

 

A9: We are professional of railway maintenance equipment manufacturer. We have more than 400 types   products,such as Rail Grinder, Rail Cutter, Rail Tamper, Rail Tenser, Rail Adjustor and so on.

 

Our quality management is guided by the overall development thinking, and strictly controls each link in the product production and operation chain of our 240mAh Portable Remote Control Jammer Dual Frequencies 433MHz/315MHz Signal Jamming Device for Sale to ensure that each link is monitored and safe. We actively seek cooperation and consensus in the competition to achieve the optimal allocation of market resources. In an effort to know our merchandise and company extra, you may come to our factory to view it.

Hot Tags: SNGM-180 designed top quality portable internal combustion rail grinding machine, China, manufacturers, suppliers, made in China, railway tamping system for railway track tamping error, track tamping device for railway track tamping deviation, Railway Lifting Machine, rail straightening for construction railways, Track Vehicle Exchanger, rail car inspection