580H(D) compressed air quarry drilling machine

We take technology as a means to develop and update equipment, so that our Track Tamping Machine, Hydraulic Rail Tamping Device, Rail Welding Processes continue to improve and progress. As always, we are guided by the modern corporate philosophy, constantly innovate and surpass with the spirit of 'pursuing perfection' and improve the core competitive advantage of the company, providing customers with better solutions. We have always follow the law of industry development and our company's own development. In addition to continuous innovation and implementation of technology research, our company has also put a lot of effort in quality management.

 

Product Description

SNGM-180 portable internal combustion rail grinding machine for all types of rails for all-round grinding, its small size, flexible and lightweight, simple operation, high grinding efficiency, easy to carry, easy maintenance and repair, but also for other Occasions.

Usage Methord

1, the gasoline and two-stroke Komatsu gasoline engine special lubricants mixed with 50: 1 ratio or the use of the market to sell the two-stroke oil 25: 1 ratio of mixing, and shake evenly. Specific methods refer to the gasoline engine manual.

2, check whether the wheel damage and moisture deformation, the end surface is smooth, if the normal use of the wheel should be replaced immediately. Press the stop button above the spindle (stop button can only be used as a disassembly lock nut, prohibited as a stop brake), use the machine to carry the wrench, the grinding wheel lock nut off, replace the new wheel The Install the grinding wheel with the same way to tighten the lock nut. (Note: If the lock nut is not easy to remove through the stop button, you can use other wrenches on the back of the grinding wheel in the flat side, and then forced to disassemble.

3, start the gasoline engine, no-load operation of not less than 30 seconds, one hand to hold the front armrest, one hand after holding the handrail, internal combustion engine warmer, gradually increase the throttle, if no abnormal sound, the equipment is running smoothly and then polished.

After grinding

Grinding rail top

Grinding Crossing

Cutting fish bolt

Technical Parameters

1.Petrol engine
Model	Two-stroke gasoline engine
Power	1.42kW
Speed	≥7500r / min
2. Grinding wheel	∮ 180 × ∮22.2 × 6 Or ∮ 150 × ∮ 22 × 6
3. Wheel speed	≥ 70m / s
4, The spindle speed	≥ 6000r / min
5. Outer dimension	780 × 270 × 310
6. Machine weight	7k

Packaging

Production Flow

Certificate

Assessed Supplier

ISO9001

CRCC Cerfifite

 

Cooperation

Pakistan

Brazil

Poland

Thailand

Our product has exported to above 30 countries and regions in the last 3 years. Our good quality, reasonable price and perfect after-sales service have won the customers' attention. Warmly weclome you visit us and obtain the chance to cooperate.

FAQ

Q1:Who I am ?

 

A1:This is Miley Wang ,sale manager of the factory.

 

Q2:What is the Warranty about your product?

 

A2: 1 year for warranty .Consumable parts are available.

 

Q3:How is your quality?

 

A3: To guarantee top quality,best material are used.Besides, The engine is imported from abroad. You are highly welcome to visit our factory.

 

Q4:What we do?

 

A4:JINZHOU TIEGONG RAILWAY MAINTENANCE MACHINERY CO.,LTD is a professional factory producing small type railway maintenance machine. Such as Cutting machine ,Grinding machine, Tamping machine etc.

Q5: Why choose us?

 

A5:Top quality , competitive price ,plenty stock And Excellent Service.Our factory has more than 400 type products,24 years producing experience. Most of the pictures on Other suppliers’ website were stolen from our website.

 

Q6:How can I trust you?

A6: We have been Gold supplier from Alibaba for 8years,15years of overseas trading experience .Our reputation among customers and their satisfaction are the main reasons for our success.

 

Q7:What service you can provide?

 

A7: Installation video And user manual offered. For big quantity order , we can dispatch our engineer foroversea door-to-door service

 

Q8:What is the delivery condition and the payment?

 

A8: various methods of payment are acceptable.T/T is the commonly used way. Shipment will be arranged within 15days .We will inform you if short stock.

 

Q9:Your company is manufacturer or dealer?

 

A9: We are professional of railway maintenance equipment manufacturer. We have more than 400 types products,such as Rail Grinder, Rail Cutter, Rail Tamper, Rail Tenser, Rail Adjustor and so on.

 

 

 

 

Product Description

SNGM-180 portable internal combustion rail grinding machine for all types of rails for all-round grinding, its small size, flexible and lightweight, simple operation, high grinding efficiency, easy to carry, easy maintenance and repair, but also for other Occasions.

 Usage Methord

   1, the gasoline and two-stroke Komatsu gasoline engine special lubricants mixed with 50: 1 ratio or the use of the market to sell the two-stroke oil 25: 1 ratio of mixing, and shake evenly. Specific methods refer to the gasoline engine manual.

2, check whether the wheel damage and moisture deformation, the end surface is smooth, if the normal use of the wheel should be replaced immediately. Press the stop button above the spindle (stop button can only be used as a disassembly lock nut, prohibited as a stop brake), use the machine to carry the wrench, the grinding wheel lock nut off, replace the new wheel The Install the grinding wheel with the same way to tighten the lock nut. (Note: If the lock nut is not easy to remove through the stop button, you can use other wrenches on the back of the grinding wheel in the flat side, and then forced to disassemble.

3, start the gasoline engine, no-load operation of not less than 30 seconds, one hand to hold the front armrest, one hand after holding the handrail, internal combustion engine warmer, gradually increase the throttle, if no abnormal sound, the equipment is running smoothly and then polished.

After grinding 

 

Technical Parameters

1.Petrol engine
Model	Two-stroke gasoline engine
Power	1.42kW
Speed	≥7500r / min
2. Grinding wheel	∮ 180 × ∮22.2 × 6 Or ∮ 150 × ∮ 22 × 6
3. Wheel speed	≥ 70m / s
4, The spindle speed	≥ 6000r / min
5. Outer dimension	780 × 270 × 310
6. Machine weight	7k

Packaging

Production Flow

Certificate

Assessed Supplier

ISO9001

CRCC Cerfifite

 

Cooperation

Pakistan

Brazil

Poland

Thailand

Our product has exported to above 30 countries and regions in the last 3 years. Our good quality, reasonable price and perfect after-sales service have won the customers' attention. Warmly weclome you visit us and obtain the chance to cooperate.

FAQ

Q1:Who I am ?

 

A1:This is Miley Wang ,sale manager of the factory.

 

Q2:What is the Warranty about your product?

 

A2: 1 year for warranty .Consumable parts are available.

 

Q3:How is your quality?

 

A3: To guarantee top quality,best material are used.Besides, The engine is imported from abroad. You are highly welcome to visit our factory.

 

Q4:What we do?

 

A4:JINZHOU TIEGONG RAILWAY MAINTENANCE MACHINERY CO.,LTD is a professional factory producing small type railway maintenance machine. Such as Cutting machine ,Grinding machine, Tamping machine etc.

Q5: Why choose us?

 

A5:Top quality , competitive price ,plenty stock And Excellent Service.Our factory has more than 400 type products,24 years producing experience. Most of the pictures on Other suppliers’ website were stolen from our website.

 

Q6:How can I trust you?

A6: We have been Gold supplier from Alibaba for 8years,15years of overseas trading experience .Our reputation among customers and their satisfaction are the main reasons for our success.

 

Q7:What service you can provide?

 

A7: Installation video And user manual offered. For big quantity order , we can dispatch our engineer foroversea door-to-door service

 

Q8:What is the delivery condition and the payment?

 

A8: various methods of payment are acceptable.T/T is the commonly used way. Shipment will be arranged within 15days .We will inform you if short stock.

 

Q9:Your company is manufacturer or dealer?

 

A9: We are professional of railway maintenance equipment manufacturer. We have more than 400 types   products,such as Rail Grinder, Rail Cutter, Rail Tamper, Rail Tenser, Rail Adjustor and so on.

 

The excellent performance of our 580H(D) compressed air quarry drilling machine and high-level design capabilities of our team show our obvious advantages over competitors. We continue to improve the level of technology in the field of environmental protection, promote technological innovation and application, and take practical actions to promote the construction of an environment-friendly society. Our colleagues uphold the communication to solve customer questions as their own responsibility, we uphold the way of doing things of becoming friends with each customer.

Hot Tags: SNGM-180 designed top quality portable internal combustion rail grinding machine, China, manufacturers, suppliers, made in China, railway track lifting spring, rail car volume, Hydraulic Track Lifting and Lining Machine, track wrench, railroad maintenance tamping services for railway track tamping conversion, rail replacement equipment