Single-Person Inspection Trolley

This trolley is suitable for the inspection car running on the steel rail with the aid of the auxiliary supporting wheel frame. It is suitable for the 1435mm gauge. It must be driven on the blocked track or the line that does not pass the train. The auxiliary supporting wheel frame adopts a detachable and foldable design, which is convenient for transportation. , Fast installation, small size and so on. Equipped with a lithium battery power source, because this car is not a rail car, it is not easy to drive too fast, and the driving speed cannot exceed 20km/h, please keep in mind. In case of danger due to speeding, the consequences shall be at your own risk.

Technical parameters:

1.Driving speed: ≤20Km/h (no speeding)

2. Motor rated voltage: 48V

3. Lithium battery voltage and capacity: 48V/12AH (body battery); 48V/20AH (backup battery)

4. Charging Time: 8～10 hours

5. Output voltage: AC22D±10% V50-60HZ

6. Charging voltage: 48.0V±0.4

7. Cruising range on one charge: body battery about 15km; backup battery about 25km

8. Total weight: 83kg

9 . Dimensions: 2100×1360×1000mm

Working principle and basic structure Working principle:

Lithium battery is used as power source, through driver, controller, adjustment

The 2-speed handle controls the rotation of the direct motor, and is supported by the auxiliary supporting wheel frame to drive the running wheel to rotate, so as to achieve the purpose of the inspection trolley running on the rail.

Basic structure: 1. Mobile phone bracket; 2. Charging port; 3. Right foot pedal; 4. Left foot pedal; 5. Rear fixed frame; 6. Spare battery cable; 7. Spare battery; 8. Spare battery fixed Beam; 9. Start switch; 10. Front fixed frame; 11. Body

How to use

1.Before driving, check whether all electrical switches are flexible and reliable.

2. Before driving, check whether the battery power is sufficient. For example, when the inspection trolley is not in use, the battery should be charged every three months.

3. Assemble the auxiliary support wheel frame of the inspection trolley according to the illustration in the manual, determine the forward direction, then place the trolley body in the fixing point of the auxiliary support wheel frame, and lock the lock.

4. When the safety of the personnel is confirmed, the operator turns on the start switch, lightly twists the accelerator handle, and makes the inspection car drive slowly. During the driving process, the driving speed can be increased or decreased, and the speed of the inspection car shall not exceed 20km. .

5. If you need to stop, rotate the accelerator to the lowest speed in advance, and slowly squeeze the brake handle until it stops.

6. This vehicle is equipped with headlights and can be driven at night. Note that the speed should be controlled at about 10km/h when driving at night.

If you want to know more details,please contact me~

Alina Shen

Email address: jztg0115@163.com

Ph/whatsapp/wechat: +8618341633378

Hot Tags: single-person inspection trolley, China, manufacturers, suppliers, made in China, rail car driver, rail car disadvantage, rail car efficiency, Rail Tamping Series, rail car capacity, Railway Car