Railway Ballast Blaster Undercutter

Its used for excavating ballast at the bottom of thesleeper, the machine cuts into the bottom of thesleeper from one side of the rail through theslewing mechanism , and the excavated ballast istransported to the outside of the sleeper throughthe ballast discharge mechanism

Send Inquiry

Product Introduction

The ballast plough is an attachment that can easilyadjust the distribution of ballast in the track. Theopening and closing angles and directions of theplough boards on both sides can be adjusted.Byadjusting the opening and closing directions of theplough board on both sides, that can expand theworking range, and can quickly change the slope angleIt can also achieve the conveying and distributing ofballast from outside to inside, or from inside to outsideTherefore, this ballast plough not only can repair roadbed slopes, but also can repair the sidewalks on theshoulder of the horizontal plane.

product-798-444

The sleeper changing machine consists of two parts: asleeper changing clamp and a shield plate. First, useshield plate can easily and quickly remove theroadbed gravel around the sleeper that needs to bereplaced, and then use its hydraulic gripper to clampthe sleeper that needs to be replaced and pull it out ofthe track bed, and put the new sleeper into the rail onthe road bed below. Then use shield plate make theroadbed gravel evenly. The cleaning,replacing andleveling can be completed at one time, and sleepercan be replaced in an average of 30-60seconds,which is convenient and fast.

product-874-447